S110 Lawn Tractor

19-hp (14.2-kW) engine

Engine oil filter and fuel filter

A 19-hp (14.2-kW) single-cylinder engine has plenty of power and torque to handle tough mowing, mulching, and bagging:

• Electronic ignition for fast starts
• Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
• Cast-iron cylinder liner for long engine life
• Overhead valves for excellent power and fuel economy
• Anti-vibration system 
• Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
  • More effective when operating the tractor on an incline
• Large fuel filter for trouble-free operation

No-tools oil drain valve

No-tools oil drain valve is easy to access when changing engine oil.

Fuel tank

Convenient fuel filler opening

• The capacity is 2.4 U.S. gal. (9.1 L).
• The fuel filler opening is conveniently located under the seat. 
  • Filling the tank without spilling is easy.
  • A tethered fuel tank cap is more convenient.
  • The sealed fuel cap helps keep vapors inside the tank.

Solid one-piece frame

Solid one-piece frame

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

• Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.
• One-piece, steel fender deck is bolted to the frame.

Cast-iron front axle will not bend

Front axle and wheel spindle

The front axle is constructed of solid cast iron that will not bend:

• Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
• Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
• Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.

Front bumper protects the tractor

Front bumper

Front bumper

The front bumper is included on the S130, S140, S160, S170, and S180. It is available as an optional attachment for the S100, S110, and S120.

• Additional front-end protection
• Attractive, bold style

CargO Mount™ system makes installation of rear bagger and other attachments easy

Rear CargO Mount points

Front CargO Mount points at the top of the dashboard

Rear bagger is mounted with CargO Mount points

Rear bagger is mounted with CargO Mount points

The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor

Front blade, weather enclosure, and chains on a 100 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

• 44-in. (112-cm) Snow Blower
• 46-in. (117-cm) Front Blade
• Tire chains or TerraGrip traction belts
• Weather enclosure
• Weights

Two-pedal speed/direction controls

Forward speed control pedal in use

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:

• Automotive-type accelerator controls ensure easy operation.
• Operator can change direction without lifting foot off the platform.
• Large pedal surface gives superior operator comfort.

Hydrostatic transmission

Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

• Tuff Torq TLT200 – S100, S110, S120, S130, S140, and S160
• Tuff Torq K46 - S170 and S180

Comfortable operator station, S130 shown

Comfortable operator station, S130 shown

The operator station is designed for operator comfort and easy operation:

• Controls are positioned where they are easy to reach and use to control the tractor.
• The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
• The seat is positioned to provide the most comfortable operator position.

Steering wheel and dash, S130 shown

Wide footrest with debris-removal channels

Controls are easy to see and use:

• Large, three-spoke steering wheel for greater operator comfort and control
• Ignition switch is on the dash for starting ease

Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:

• The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
• Debris-removing channels help keep the footrest area clean and dry.

Comfortable seat

Easily adjusted seat

Operator comfort is enhanced with a 15-in. (38-cm) high-back, two-piece seat with an open back:

• The open-back seat design keeps the operator cooler
• Especially helpful when operating the tractor for extended periods of time
• Easily adjusted forward or rearward while in the seat
• Seat travel of 5.5 in. (14 cm) and 10 different positions to adjust for operator height

Seat springs give a smoother ride

Seat tilted forward

Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.

The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.

Storage compartment

Beverage holder (shown with optional storage compartment cover)

Storage compartment and beverage holder, located on the right-side fender, are conveniently located and easy to use.

NOTE: A storage compartment cover is standard on S120, S130, S160, S170, and S180 Tractors and optional on the S100, S110, and S140.

Fender flares

Fender flares included on the S130 Tractor cover the tires more completely and add style to the tractor.

S100 Tractor

Steering wheel and controls on S100

Instruments and controls

The contoured dash has clean, attractive styling:

• Controls are color-coded and labeled for easy identification.
• Controls are logically placed and easy to reach.
• The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
• Functional design of the controls provides good appearance and a comfortable feel.

Side-by-side transmission control pedals

Two-pedal speed/direction controls

Side-by-side foot pedals

Side-by-side foot pedals control the speed and direction of travel:

• Automotive-type accelerator controls ensure easy operation.
• Operator can change direction without lifting foot off the platform.
• Large pedal surface gives superior operator comfort.

Mower deck height adjustment

Mower deck height adjustment lever

A spring-assisted, ergonomically designed lift lever simplifies adjusting the mower cut height:

• Increments of 1/4  in. (0.64 cm) allow fine-tuning the cut height.
• Cut height is adjustable from 1 to 4 in. (2.5 to 10.2 cm).
• The lift handle is shaped for easy use and is out of the way of entering or exiting operators.

Parking brake control

Brake/parking brake pedal

Parking brake lever

The parking brake control is conveniently located on the tractor pedestal for easy access. It holds the brake pedal securely in the locked position.

Manual power take-off (PTO)

PTO engagement lever

The mower deck is engaged with the easy-to-see and easy-to-use yellow lever above the dashboard. Its placement on the right side leaves a lot of room on the left, the entry side of the tractor, for the operator to get on and off the tractor.

Reverse implement option (RIO)

RIO switch

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

• Carefully check the area around the machine.
• Disengage the mower before backing up.

NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

1. Stop forward travel.
2. Look behind the machine to be sure there are no bystanders.
3. Push and hold in the RIO switch while depressing the reverse pedal slightly.

NOTE: If the engine and mower or other attachment stops while repositioning the machine, return the attachment engagement lever/switch to the off position. Start the engine and engage mower or other attachment. Begin again with step 2.

4. Release the RIO switch and reposition the machine as the machine begins to move rearward.
5. Resume forward travel. The mower or other attachment should continue operating.
6. Repeat procedure to position the machine again.

Fuel tank gauge shows fuel level from the operator's seat

Fuel tank gauge

Convenient fuel- filler opening

The fuel tank gauge shows how much fuel is in the tank and can be seen without leaving the operator's seat:

• Easy to check fuel level
• Convenient location

One-piece hood is easy to open

Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

• Important service points are located within easy reach.
• A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.

Easy-to-service engine fuel and oil filters

Seat tilted up for easy access to fuel-fill opening

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

The seat tilts up and out of the way to make adding fuel easy.

Hood will not rust or dent, and includes quality headlights

One-piece hood opens for service access

Quality headlights for good visibility

• Molded-in color material reduces sound and will not rust or dent.
• Same quality hood material as on larger John Deere tractors provides good resilience and UV resistance for an extended time
• Openings on the side let in plenty of cooling air while keeping the sound level low.
• Two headlights provide good lighting for nighttime operation.

MowerPlus app screen

MowerPlus app maintenance screen

Keep a John Deere lawn tractor running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

Look for the MowerPlus app on the iOS® or Android™ system app stores.

The app supports residential lawn equipment such as 100 Series, 200 Series, X300, X500, X700, Z200 through Z600, and many similarly sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

NOTE: Some product image variation may exist.

MowerPlus connectors also available (sold separately)

MowerPlus hour meter connector

MowerPlus deluxe smart connector, with a phone

The John Deere MowerPlus connectors wirelessly link a lawn tractor to the MowerPlus app on a mobile device.

iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.

42-in. (107-cm) Mower Deck

42-in. (107-cm) Mower Deck

The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior mowing performance, convenience, and reliability:

• The deep-deck design lifts grass for a clean, even cut.
• The smooth underside has no nooks and crannies, preventing grass buildup and evenly dispersing grass clippings.
• The rolled outer edge of the deck provides extra strength and protection.
• Dual-stage E-coat and powder paint coatings provide extra protection from rust.
• Flexible discharge chute minimizes property and mower deck damage.

The 42-in. (107-cm) Edge Mower Deck is a two-spindle design with heavy-duty characteristics:

• The 13-gauge, 0.090-in. (2.3-mm) steel deck provides years of dependable mowing.
• Included three-in-one blades work well for side-discharge, mulching, or bagging.
• The blade-to-spindle design provides a unique mounting system for the mower blade that provides extra safety and convenience.
• No tools are required to switch from mulching to side discharge to rear bagging.
• A mulching cover is an optional attachment that can be installed without tools to allow mulching with the standard mower blades.
• High-performance mulching blades are available to enhance mulching performance.
• A high-performance mulching attachment  is an optional attachment that includes a mulch plug and special mulching blades for excellent performance.

Mower wash port

Mower wash port

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy:

• A hose connector is included with mower deck.

Optional bagger

6.5-bu (229-L) hopper and chute on an S100

A cut-and-throw, 6.5-bu (229-L) bagger is sold separately and comes with bagging blades. Special bagging blades are not required but they can enhance performance.

The bagger kit provides an efficient means of collecting grass clippings and leaves. It can be set up without tools in minutes and has easy-to-empty bags.

StarLock™ blade design

StarLock blade design

The StarLock blade design keeps the blade bolt at the correct torque for easy removal.

Optional blades for difficult mulching or bagging conditions are available.

An exclusive 2-year or 120-hour single-source, bumper-to-bumper warranty* is included for all John Deere 100 Series Tractors.

• The warranty is hassle free, with John Deere handling the service and paperwork.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

7P Poly Utility Cart

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

7P Poly Utility Cart

• The cart has a premium molded, high-density polyethylene box construction.
• Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
• Polyethylene body will not rust or dent; it stays looking new longer.
• 0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
• Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
• Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
• Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
• Styling is compatible with other John Deere equipment.
• Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.

Wheels

7P Utility Cart wheel

Wheels are mounted on a solid, one-piece axle for durability.
 
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

• Good flotation
• Minimal rolling resistance
• Shock absorption

Sloped tailgate

Sloped tailgate for easy emptying

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch

Spring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:

• Fast, easy attachment to the tractor hitch
• Spring pin to ensure the pin stays in place

Tilt latch

Tilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

8Y Convertible Poly Utility Cart, push mode

8Y Convertible Poly Utility Cart, tow-behind mode

The 8-cu-ft (0.23-m³) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

• Compatible with riding lawn tractors and garden tractors
• Durable poly construction
• All-terrain pneumatic tires
• Converts from tow cart to push cart without tools
• Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

10P Poly Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

• Firewood
• Lawn debris
• Sand
• Dirt
• Mulch
• Garden tools
• Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

• 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
• Will not dent or rust
• 15x6 tubeless pneumatic tires with turf tread for maximum traction
• Easy, hands-free foot pedal dump release
• Steep dump angle for complete emptying

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Poly Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

10PX Poly Utility Cart

10PX Poly Utility Cart full-dump lever

The 10PX tow-behind cart is great for hauling lawn debris, sand, dirt, mulch, and plants:

• Large, 650-lb (295-kg) capacity
• 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
• Will not dent or rust
• 15x6 tubeless pneumatic tires with turf tread for maximum traction
• Easy, hands-free foot pedal dump release

Cart in partial-dump position

Cart in full-dump position

Hand lever releases 180-degree dump angle for complete emptying

• Empties all material
• Makes cleanup of the cart easier

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10PX Poly Utility Cart
Order number: LP72978

Oilite is a trademark of Beemer Precision, Incorporated.

13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Welded box

Welded box construction provides maximum reliability:

• Requires less setup time than the bolted construction.
• Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.

Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

• Good flotation
• Minimal rolling resistance
• Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgate

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch

Spring-pin tractor hitch

Tilt-dump latch

A large-diameter hitch pin provides plenty of strength:

• Fast, easy attachment to the tractor hitch
• Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

• Steep dump angle makes emptying easier.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

16YS Swivel Cart

The 17-cu-ft (0.48-m³) capacity 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

Key features include:

• Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
• Convenient foot pedal release for easy dumping
• Molded stake pockets for enlarging the bed size

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

16YS Swivel Cart

Order number: LP68186

Oilite is a trademark of Beemer Precision Incorporated.

17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

• Firewood
• Lawn debris
• Sand
• Dirt
• Mulch
• Garden tools
• Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Key features of the 17P Utility Cart:

• Cart has premium molded polypropylene box construction.
• Polypropylene body will not rust or dent, staying new looking longer.
• 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
• Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
• Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
• Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
• Styling is compatible with other John Deere equipment.
• 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
• Wheels are mounted on a solid one-piece axle.
• Wheels turn on iron/Oilite® bushings with grease fitting for long life.
• Spring-loaded dump latch is easy to use.

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

6.5-bu (229-L) rear bagger

6.5-bu (229-L) rear bagger

The hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:

• Two durable bags with a generous, 6.5-bu (229-L) capacity lift out for emptying and are easy to reinstall.
• Efficient lower chute provides smooth flow of material to reduce chance of plugging.
• An air-exhaust duct directs air from the hopper back and toward the ground for clean operation.
• A convenient bungee-cord fastener makes opening and closing the hopper easy.
• It is easy to install and remove the hopper, and no tools are required after the initial installation.
• Pins and spring clips hold the hopper and chute in place; there is nothing left to interfere with other attachments when removed.
• Loose-knit bags allow more air to flow through to provide complete bag filling in wet and heavy grass conditions.

Specifications

Tractor compatibility and requirements

The 6.5-bu (229-L) rear bagger is for use with:

• 100 Series and S240 Tractors equipped with a 42-in. (107-cm) Edge™ Mower Deck.

Requirements and/or recommendations:

• Front ballast is recommended when bagging, especially on hills or inclines.
• Use of rear tow-behind attachments that could come in contact with the hopper assembly is not recommended when the hopper assembly is installed.
• Special mower blades are not required.
• High-lift mower blades for use in difficult bagging conditions are included with BG20776 6.5-bu (229-L) hopper and chute for 100 Series and S240 Tractors, 42 in. (107 cm).

6.5-bu (229-L) hopper and chute on an S100 (front view)

6.5-bu (229-L) hopper and chute on an S100 (rear view)

Overview

The bagger kit can be set up without tools in minutes, provides efficient bagging performance, and has easy-to-empty bags. This is also commonly known as a material collection system (MCS).

Benefits

Bagging

• Two durable bags provide a generous 6.5-bu (229-L) capacity.
• The lower chute provides smooth airflow to reduce the chance of plugging.
• A duct directs air leaving the hopper toward the ground for clean operation.
• Loose-knit bags and a large exit duct allow more air flow to provide complete bag filling in wet grass conditions.

Emptying

• Monitor bag filling progress through a window; see light coming through the loose-knit bag or watch for grass lying against it.
• The hopper lid stays open while you empty the bags.
• The bags slide out with a pull and the handles make emptying easy.
• The hopper cover automatically latches when you close it.

Additional details

• Front ballast is recommended when bagging, especially on hills or inclines. Follow instructions in your operator’s manual.
• Use of rear tow-behind attachments that could contact the hopper assembly is not recommended.
• Installation:
• The bagger kit can be set up without tools in minutes.
• Special mower blades are not required for bagging. Two optional high-lift blades (AM141034) are included to increase bagging performance.
• The kit is easy to remove and stores compactly. No parts are left behind to interfere with other attachments.

The 6.5-bu (229-L) hopper and chute are for use with:

• Model year 2003 and newer 100 Series Tractors with 42-in. (107-cm) mower deck
• Blades in bagger bundle will not fit L100, L108, L110, L111, L118, L120, and L130 Tractors; order GY20567 blade.
• Model year 2020 and older S240 Tractors (serial number -880,000) with 42-in. (107-cm) Edge™ mower deck

Dump from the seat capability for 100 Series Tractors with a 6.5-bu material collection system (MCS)

MCS 6

The MCS 6 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere 100 Series and S240 Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere Material Collection System, installation is a breeze with simple hand tools.

Features:

• Lightweight aluminum construction
• Designed for full material expulsion
• Easy access self-latching spring tripped handle
• Ships almost fully assembled (5 minute handle assembly)
• Installs in seconds (after initial assembly)

Benefits:

• Easy - Convenient Access to dump handle directly from seat 
• Clean - No material handling, no mess 
• Efficient - Unload and go without leaving the seat 

NOTE: Fits John Deere 100 Series and S240 Tractor 2-bag material collection systems. Not compatible with EZtrak™ Zero-Turn Mowers.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

MCS 6 attachment
Order number: LP47167

Magnetic hitch pin

Fits John Deere equipment tow behind attachments.

• Strong magnetic grip
• Rust resistant
• Easy to install, secure fit

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

46-in. (117-cm) Front Blade

The front blade is excellent for pushing light snow or other loose material.

The blade is constructed for good performance and long life:

• Blade surface is curved to roll rather than push material, which requires less power and increased blade capacity.
• Bolt-on, replaceable cutting edge takes most of the wear to greatly extend the useful life of the blade.

For operator convenience, the blade comes with standard equipment for controlling it from the tractor seat:

• Blade can be angled left, right, or used in the straight-ahead position.

Full working range

Full working range

The 46-in. (117-cm) blade can be operated up to 6.5 in. (16.5 cm) above ground level.

Floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.

The lift-linkage design makes raising the blade easy.

Controlled from tractor seat

Left-hand blade control

For operator convenience, the blade comes with angling and lift components as standard equipment so it can be controlled from the tractor seat.

Front blade lift and angling components are included as standard equipment:

• Blade can be angled left, right, or used in the straight-ahead position.
• For 100 Series Tractors, L100 Series Lawn Tractors, G110 Garden Tractors, and S240 Tractor, lift components are provided with the blade so it can be raised and lowered from the tractor seat.

Specifications

Tractor compatibility and requirements

The 46-in. (117-cm) Front Blade is compatible with:

• 102, 115, 125, 135, 145, 155C, and 190C Tractors
• L100, L108, L110, L111, L118, L120, and L130 Lawn Tractors, and G110 Garden Tractor
• LA100, LA110, LA120, LA130, LA140, and LA150 Tractors
• LA105, LA115, LA125, LA135 Limited Edition, LA135 Special Edition, LA145, LA155, LA165, and LA175 Tractors
• D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170 Tractors
• E100, E110, E120, E130, E140, E150, E160, E170, and E180 Tractors
• S100, S110, S120, S130, S140, S160, S170, and S180 Tractors
• S220 and S240 Tractors

For model years 2016 and newer, the 46-in. (117-cm) Front Blade (BG20943) has a change to the mounting frame to make it compatible with model year 2016 and newer 100 Series and 200 SeriesTractors:

• The model years 2016 and newer Front Blades are also backward compatible with model year 2015 and older 100 and 200 Series Tractors.
• The model year 2015 46-in. (117-cm) Front Blade (BG20020) is not compatible with model year 2016 and newer tractors.
  • A model year 2016 and newer tractor steering change from a dual drag link system to a single drag link and tie rod design causes interference with older front blades.

Requirements and/or recommendations:

• Rear weights and tire chains are required for additional traction.

LG262 home maintenance kit

Typical home maintenance kit

Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.

The LG262 home maintenance kit includes the following:

Battery charger

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

• Automatically determines if the battery is 6- or 12-V and adjusts accordingly
• Helps maintain battery in good condition and ensures it is fully charged
• Powers on to charge battery and powers off when fully charged
• 'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
• 1.5-amp trickle charges small batteries in 2 to 12 hours
• Maintains large battery charges
• Hookup protection guards battery and charger from damage 

Includes a choice of battery connection methods:

• Standard color-coded clips to connect to any battery
• Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use

Bucket holder (single)

Transporting mulch, plants, or debris is easier with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. For use with any standard 5-gal. (19-L) or 6-gal. (23-L) bucket, the bucket holder is designed to carry up to 70 lb (32 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100

8-oz (237-mL) Fuel-Protect gasoline stabilizer

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round: 

• Has corrosion preventers
• For lawn and garden equipment and other gasoline-powered vehicles
• Ensures quick starts in all two- and four-cycle engines
• Use in gasoline, gasoline-oil mixture, and ethanol blends
• Use to treat gas cans at each fill-up or use at every fill-up of vehicle
• Keeps fuel fresh for 12 months
• Contains a fuel injector and carburetor cleaner
• 1 oz (29.6 mL) treats 2 gal. (7.6 L)

Always use fuel stabilizer in gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit John Deere Parts.

Helpful tips:

• Add fuel stabilizer every time fuel is purchased.
• Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
• John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
• Use plastic fuel containers to store fuel; ask a local John Deere dealer.
• For best results, use a spill-proof gas can that automatically seals the gas can vent.
• Store fuel in a cool, dry, dark place in a sealed fuel can.
• Fill tank to the top every time the machine is put away.
  • Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine. 

For more information on fuel, visit John Deere Groundscare.

Wireless connector packaging

The John Deere MowerPlus hour meter connector wirelessly links a model year 2003 and newer 100 Series or 200 Series Lawn Tractor to the MowerPlus app on a mobile device:

• No tools are needed for installation.
• Detailed setup instructions are included.
• The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
• The wireless connector and app work together to offer helpful information.

Tractor features available for viewing on the MowerPlus app include:

• Tractor engine hours automatically synchronized to the app
• In-app maintenance reminders and log, based on engine hours
• Help to determine the best time to mow
• Expert pre-mow optimization tips
• Maintenance walk-through instructions

The operator can visit their device’s app store to see new app features as they are added.

MowerPlus hour meter connector (BUC10510) for 100 and 200 Series Lawn Tractors

Hour meter connector (socket end shown)

Hour meter connector (pin end shown)

The hour meter connector plugs into the back of a 100 or 200 Series Tractor key switch. The tractor’s wiring harness plugs into the other end.

Compatibility and requirements

BUC10510 MowerPlus hour meter connector is for use with:

• Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
• Model year 2015 to 2020 S240 Tractors (serial number -880,000)
• S100, S110, S140, and S220 Tractors

NOTE: Model year 2021 and newer 100 and 200 Series Tractors equipped with a digital fuel gauge are compatible with the more-capable BUC10929 MowerPlus deluxe smart connector.

MowerPlus hour meter connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:

• iOS® version 10 or higher is compatible with the hour meter connector.
• Android™ versions are not compatible with the hour meter connector at this time.

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Storage compartment shown with cover

The storage compartment cover is standard equipment on some tractor models. For those tractors not already equipped, the cover is available to keep the storage compartment and contents clean and dry.

StarLock™ blade design

42-in. (107-cm) Starlock blade mounting

StarLock™ blade design

42-in. (107-cm) Starlock blade mounting

42-in. (107-cm) Mower Deck

A complete mower deck can be ordered for replacement, if required.

Incomplete decks are also available through the John Deere Parts system. These decks include the shell, discharge chute, and decals.

This 42-­in. (107-­cm) Mower Deck comes with two medium­-lift blades for normal cutting and bagging conditions.

NOTE: When replacing a model year 2015 or older mower deck, also order GY22387 power take-off (PTO) cable.

Front blowout baffle

The front blowout baffle kit is for the 42-in. (107-cm) Convertible Mower and the 42-in. (107-cm) Edge™ Xtra Mower. It will reduce the amount of blowout when bagging leaves or other dry material.

Striping kit brush - top view

Striping kit brush - side view

Features and benefits

• Homeowners can now achieve results just like the professionals.
• Brush is easy to adjust for varying mower cutting height.
• Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf.
• The brush striping kit is a very economical and functional attachment.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42X - 42-in. (107-cm) tractor grass groomer

Order number: LP1001

Mower deck leveling gauge

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

• Lawn tractors
• Lawn and garden tractors
• Riding mowers
• Front mowers
• Commercial walk-behind mowers
• Zero-turn-radius mowers

42-in. (107-cm) mulching attachment (shown on X300 Series mower deck)

The mulching attachment for the 42-in. (107-cm) Mower Deck provides excellent performance. This is a high-performance mulching attachment that includes a mulch plug and special mulching blades.

Features:

• The blades included are designed to work with the StarLock™ blade mounting system used on the 42-in. (107-cm) Mower Deck for 100 Series Tractors, 200 Series Tractors, and X300, X304, and X310 Tractors. They can also be used on the 42-in. (107-cm) Mower Deck without the StarLock system for LT Series Tractors.
• The special mulching blades included can be used for side discharging, although the overall cut quality may decline slightly.

NOTE: Blades  in BM21816 mulching attachment will not fit L100, L108, L110, L111, L118, 102, 115, 125, and 135 Tractor mower spindles, so should be discarded; standard mower blades may be used for mulching.

42-in. (107-cm) mulch cover

The mulch cover is available as an option.

Front bumper components

Front bumper mounted on tractor

Overview

The front bumper is an optional attachment for lawn tractors.

Benefits

• Additional front-end protection
• Attractive, bold style provides bolder look for the tractor

Key features:

• Protects against sun damage, rain, dust, and tree sap
• Split back for fast fitting and easy access after installation
• Fabric is coated for maximum water resistance and repellency
• Reinforcements at key locations
• Reinforced air vent lets air circulate and helps prevent ballooning in wind
• Storage pocket reverses to attractive stuff case

For For use with:

• 100 Series and 200 Series Tractors with MCS installed
• X300 Series Tractors with 42-in. (107-cm) Mower Deck and MCS installed

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

Riding mower cover for tractor with MCS
Order number: LP70686

Protective cover (medium deluxe)

Features include:

• Wipe-clean reinforced bottom around mower deck
• Easy-on side handles makes snugging down cover a snap
• Dual reinforced air vents let air circulate and help prevent ballooning in wind
• Interior lining and integrated muffler heat shield
• Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
• Easy-on split back for fast fitting and easy access after installation
• Handy storage pocket reverses into an attractive storage case
• Two-year warranty

Cover provides heavy-duty protection for 100 Series, LT, LX, and 200 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (medium deluxe)

Order number: LP93617

Protective cover (standard)

Features include:

• Dual vents let air circulate and help prevent ballooning in wind
• Elastic shock cord in bottom hem for a quick, custom-like fit
• Coated fabric for maximum water protection
• One-year warranty

Cover provides all-season protection for 100 Series, 200 Series, and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (standard)

Order number: LP93917

Seat cover, deluxe medium

Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:

• Access to lumbar adjustment controls
• Large-capacity rear-zippered cargo pocket
• Two side mesh beverage pockets
• Elastic cord in bottom hem for a custom fit
• Medium size fits seats with backrests up to 15 in. (38.1 cm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, deluxe medium
Order number: LP92624

Seat cover, standard medium

Seat cover protects new seats and renews old seats:

• Cushioned seat for extra comfort
• Four convenient pockets for keeping tools and gear within reach
• Elastic cord in bottom hem for a custom fit
• Medium size fits seats with backrests up to 15 in. (381 mm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324

AUC17789 spark arrester shown

NOTE: Spark arrester design and appearance vary depending on the muffler outlet. Photo is representative of some spark arrester designs.

A spark arrester is a device for preventing the escape of sparks. In some locations, the law requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered, or grass-covered land (except on watered lawns) without a spark arrester.

This kit complies with laws in the state of California, requiring its use under certain conditions. For further information on this law, consult No. 442.5 of the California Public Resources Code.

15-gal. (57-L) Mounted Sprayer for 100 and 200 Series

The 15-gal. (57-L) tractor-mounted sprayer is compatible with the 100 and 200 Series Tractors. Convenient mounting, easy maneuverability, and overall versatility make this a perfect choice for a John Deere lawn tractor. It provides an excellent way to apply spray material, including liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 32-in. (81-cm) boom that sprays a 60-in. (152-cm) spray swath. It is also equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft (9.1 m). It has a custom mounting bracket that utilizes the existing frame holes for no-tools mounting after initial assembly. A recirculation kit is included.

Features include:

• Custom mounting hardware uses existing frame holes
• Mounts in seconds after initial assembly
• Compatible with 100 and 200 Series Tractors
• SHURflo® 100 psi, 2.1 gpm (8 L/min) on-demand diaphragm-type pump is designed for high-hour commercial applications. It can be run dry without damage.
• The brass-tipped spray wand is included as standard equipment. It is constructed of non-corrosive polypropylene material with Viton® components for multi-use applications.
• Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
• Recirculation keeps material mixed and moving
• Control valve directs spray to either the boom or spray wand
• Convenient electrical hookup includes all necessary wiring
• Rugged translucent yellow tank with molded fill-level indicators (in gal. and L)

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

15-gal. (57-L) Mounted Sprayer for 100 and 200 Series Tractors

Order number: LP53283

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

15-gal. (57-L) Tow-Behind Sprayer

Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.

Features include:

• This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
• Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
• A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties:

• Sprayers provide an excellent way to apply liquid fertilizer.
• Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

• Fertilizer is more readily available to plants.
• The fertilizer need not be worked into the soil by watering or rain before it will work.
• Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

15-gal. (57-L) Tow-Behind Sprayer

Order number: LP19478

25-gal. (95-L) Tow-Behind Sprayer

Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.

Features include:

• 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
• Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
• Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
• The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties.

• Sprayers provide an excellent way to apply liquid fertilizer.
• Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

• Fertilizer is more readily available to plants.
• The fertilizer need not be worked into the soil by watering or rain before it will work.
• Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Tow-Behind Sprayer

Order number: LP19479

SHURflo is a trademark of SHURflo, LLC.

125-lb (57-kg) Pull-Type Spin Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

• Seed
• Fertilizer
• Insecticide
• Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

• Positive on/off system (no cables)
• 125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
• 13-in. (33-cm) pneumatic tires for easy rolling
• Enclosed gearbox (metal gears)
• Ergonomic dual handle featuring Accu-way™
• Accu-way even spread pattern adjustment
• Includes screen and cover

Accu-way is a trademark of Spyker Spreaders, Inc.

Hopper screen and throat opening

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

• Dial position locks and unlocks automatically.
• More than 80 settings provide an accurate application of materials.

Specifications

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb Pull-Type Spin Spreader

Order number: LP25353

175-lb (79-kg) Pull Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

• Seed
• Fertilizer
• Insecticide
• Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

• Positive on/off system (no cables)
• 175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
• 13-in. (33-cm) pneumatic tires for easy rolling
• Fully enclosed gear box with metal gears for long life
• Accu-way even spread pattern adjustment
• Includes screen and cover

Hopper screen and throat opening

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

• Dial position locks and unlocks automatically.
• More than 80 settings provide an accurate application of materials.

Specifications

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb Pull-Type Spin Spreader
Order number: LP25354

40-in. (102-cm) Tow-Behind Aerator Spreader

The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:

• 40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
• 132 steel-tine tips on 8-in. (20-cm) diameter tine stars
• Three-position, full-sized lift lever
• Direct spreader drive for consistent performance
• Adjustable flow control
• 100-lb (45-kg) spreader capacity
• 4.10/3.5-4 pneumatic tires for easy pulling
• 75-lb (34-kg) capacity weight tray

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications 

Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

1. Rear wheel weights are recommended for additional traction.
2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for 100 Series, 200 Series, Select Series™ X300s, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
   The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Aerator Spreader

Order number: LPAS40JD

130-lb (59-kg) Pull-Type Spin Spreader

Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

130-lb Pull-Type Spin Spreader
Order number: LP39087

Broadcast Spreader

This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:

• The polyethylene hopper will not dent or rust.
• All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
• Large pneumatic turf tires ensure a positive drive and smooth operation.
• High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
• Fully enclosed gearbox eliminates downtime and maintenance.
• Autoflow feature stops the flow of materials - automatically - to prevent burns.
• Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb (79-kg) Broadcast Spreader

Order number: LPBS36JD

Sun canopy

The sun canopy provides protection from the sun's rays and gives the operator some cooling shade during the hot summer days.

Quick sun protection:

• Slips into CargO Mount™ system ports for quick installation
• Protects operator from the sun’s rays
• Tough woven polyester construction for strength and durability
• Designed to fit model year 2011 and newer 100 and 200 Series Tractors

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Sun canopy
Order number: LP68122

40 in. (102-cm) Tow-Behind Thatcherator

The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:

• 40-in. (102-cm) width to cover ground fast
• 20 spring-loaded tines for maximum performance
• Three-position adjustment
• Weight tray to allow increased scratching power

An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm). Add an extension to one end of the thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Requirements and/or recommendations:

1. Rear wheel weights are recommended for additional traction.
2. For use with the following John Deere vehicles and other lawn and garden tractors of similar size:
   • 100 Series Tractors
   • 200 Series Tractors
   • X300 Series Tractors
   • X500 Series Tractors
   • X700 Series Tractors

Ordering information

Contact a local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Thatcherator

Order number: LPTA40JD

TerraGrip Traction Belt

Protect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.

Features:

• Rubber slats surround the tire and will not damage driveways or sidewalks.
• No steel touches the driving surface.
• No-tools installation utilizes a traditional steel chain attachment system.
• Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
• TerraGrip Traction Belts are approved for John Deere 100, 200, X300, X500 M-T, and X700 Series Tractors.

Additional information for 4-wheel-steer tractor models:

• X700 Series – requires wheel spacer sold separately
• X500 Series – requires wheel stop adjustment
• X300 Series – no additional requirements

Tire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using equipment such as a snow blower or front blade.

One pair of chains is included in each bundle.

Compatibility

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, E120, S100, S110, S120, and S140 Tractors.

TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, E180, S130, S160, S170, S180, and S220 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016 and newer (serial number 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year 2015 and older (serial number -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

42-in. (107-cm) Lawn Sweeper

The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

• 42-in. (107-cm) clearing width
• 17-bu (599-L) capacity to make fast work of picking up material
• Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
• Hitch has seven positions to match up correctly with a variety of vehicles
• Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
• A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD

44-in. (112-cm) Lawn Sweeper

The 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

• 44-in. (112-cm) clearing width
• 17-bu (599-L) capacity to make fast work of picking up material
• Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
• Hitch has seven positions to match up correctly with a variety of vehicles
• Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
• A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

44-in. (112-cm) Tow-Behind Lawn Sweeper
Order number: LP49038

Dethatcher kit for sweeper

This John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Dethatcher kit for sweeper

Order number: LP42108

Multi Tool

The Multi Tool includes one platform and two separate attachments, saving space and money.

• Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
• Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
• Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
• Elongated handle - makes it easier to raise into transport or lower for use
• Spring assisted lever - makes changing the attachments quick and easy

John Deere has combined the best lawn tools into one package.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Multi Tool

Order number: LP39089