225 Offset Disk
- Hitch can be set to meet disking needs
- Choice of disk blades provided
- Gang wrenches come as base equipment
- One-piece welded mainframe
Tillage is one of the most important aspects of preparing and caring for your field. Don't trust it to anything else besides the John Deere 225 Offset Disk. This implement can be adjusted to meet disking needs, with a choice of disk blades and a reliable, one-piece welded mainframe, it's ready for anything. Find out more about the 225 Offset Disk by John Deere below.
Specifications
Specifications
Add Model
| Specifications | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 225 Offset Disk |
Fold
| Type | Rigid |
|---|
Working widths
| Spacing option A | Option 1 18 discs 2.11 m 6.92 ft, in.Option 2 20 discs 2.31 m 7.58 ft, in.Option 3 22 discs 2.54 m 8.33 ft, in.Option 4 24 discs 2.77 m 9.08 ft, in.Option 5 26 discs 3.0 m 9.83 ft, in.Option 6 28 discs 3.2 m 10.5 ft, in. Disc spacing - 22.86 cm 9 in. |
|||
|---|---|---|---|---|
| Spacing option B | ||||
| Spacing option C |
Transport width
| Spacing option A | 229 mm 9 in. |
|||
|---|---|---|---|---|
| Spacing option B | ||||
| Spacing option C |
Transport height
| Spacing option A | ||||
|---|---|---|---|---|
| Spacing option B | ||||
| Spacing option C |
Weight per blade
| Spacing option A | ||||
|---|---|---|---|---|
| Spacing option B | ||||
| Spacing option C |
Operating speed
| Miles per hour | 6.4 to 9.7 km/h 4 to 6 mph |
|---|
Power requirements
| Horsepower required | Power take-off - 29.8 to 74.6 kW 40 to 100 hp Engine - 35.8 to 89.5 kW 48 to 120 hp Light drawn - 18 discs 29.8, 20 discs 33.5, 22 discs 37.3, 24 discs 41.0, 26 discs 44.7, and 28 discs 48.5 kW 18 discs 40, 20 discs 45, 22 discs 50, 24 discs 55, 26 discs 60, and 28 discs 65 hp Medium drawn - 18 discs 41.0, 20 discs 44.7, 22 discs 47.5, 24 discs 52.2, 26 discs 55.9, and 28 discs 59.7 18 discs 55, 20 discs 60, 22 discs 65, 24 discs 70, 26 discs 75, and 28 discs 80 Heavy drawn - 18 discs 52.2, 20 discs 55.9, 22 discs 59.7, 24 discs 63.4, 26 discs 67.1, and 28 discs 74.6 18 discs 70, 20 discs 75, 22 discs 80, 24 discs 85, 26 discs 90, and 28 discs 100 |
|---|
Leveling options
| Option 1 | Parallel-lift bar and 3-leaf spring for front-to-rear leveling and increased relative pressure on front or rear gangs | |||
|---|---|---|---|---|
| Option 2 |
Depth control
| Option 1 | Mechanical depth stops | |||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 |
Hydraulic requirements
| Standard | 1 selective control valve (SCV) required | |||
|---|---|---|---|---|
| Option 1 | ||||
| Option 2 | ||||
| Option 3 |
Electrical requirements
| Standard | 9-pin connector for warning lights | |||
|---|---|---|---|---|
| Option 1 | ||||
| Option 2 |
Hitch
| Type | Combination hitch with right or left offset options |
|---|
Wing flex
| Up | ||||
|---|---|---|---|---|
| Down |
Frame
| Tubing | Structural steel - 4x4x3/406 mm 16 in. |
|||
|---|---|---|---|---|
| Underframe clearance |
Gang
| Angle | Front 25 to 48 degree (angle)Rear 25 to 48 degree (angle) Adjustable |
|||
|---|---|---|---|---|
| Tubing | Front Structural steel - 3x5x3/406 mm 16 in.Rear Structural steel - 3x5x3/406 mm 16 in. |
|||
| Gang bolt | Round - 38 mm 1.5 in. |
|||
| Gang standard | Rigid nodular iron | |||
| Welded spool diameter | ||||
| Bearings | Triple-sealed ball bearings with wear guards (no lubrication needed unless grease fittings are installed) | |||
| Scraper | Rigid |
Finishing blades
| Standard | Option 1 Spherical blade with scraper - 356 mm 14 in. |
|||
|---|---|---|---|---|
| Middle breaker | Offset |
Blades
| Spacing | 229 mm 9 in. |
|||
|---|---|---|---|---|
| Size | Option 1 Solid cone - 559 x 4 mm 22 x 0.157 in.Option 2 Solid cone or cutout cone, or a combination of a front cutout cone and a rear solid cone - 610 x 4.5 mm 24 x 0.177 in.Option 3 Solid spherical or cutout cone - 610 x 4.7 mm 24 x 0.187 in.Option 4 Solid cone or cutout cone - 610 x 6.5 mm 24 x 0.256 in. |
Wheels
| Mainframe wheels and tires | Option 1 4PR rib implement base wheel and tire option - Two 15-5KB wheels with 6.70-15 in. 4PR rib implement tubeless tires (in base price)Option 2 Wheels less tires options - Two 15-6 wheels less tires Two 16-6 wheels less tiresOption 3 6PR rib implement tubeless wheel and tire options - Two 14-6KB wheels with 9.50-14 in. 6PR implement tubeless tires Two 15-6KB wheels with 7.60-15 in. 6PR implement tubeless tiresOption 4 6PR rib implement tubeless wheel and tire option - Two wheels with 7.6-15 in. 8PR tires |
|||
|---|---|---|---|---|
| Wingframe wheels and tires | Option 1 At 152-cm (60-in.) wheel tread spacing, working width - 2.11 to 3.0 m 6.92 to 9.83 ftOption 2 At 203-cm (80-in.) wheel tread spacing, working width - 3.20 to 3.66 m 10.5 to 12.0 ft |
|||
| Stabilizer wheels |
Harrows
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 |
Rear hitch
| Available | ||||
|---|---|---|---|---|
| Tubing size | ||||
| Telescoping | ||||
| Tongue weight rating | ||||
| GVW | ||||
| Wiring harness for transport lights | ||||
| Hydraulic hoses and couplers |
Warranty
| Type |
|---|
Additional features
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 | ||||
| Option 4 | ||||
| Option 5 |
Additional information
| Date collected |
|---|