630D Draper Platform by John Deere
- Windrowing capability with 600D Drapers
- Dual-knife drive system is timed
- Cutterbar is closer to the ground
- Stainless-steel feed floor
![field photo of 630d draper platform](https://www.deere.com/assets/images/region-4/products/harvesting/draper-platforms/630d/630d_drapers_platform_r4d080404_small_94f1e25927b6ee7ed69cbb113eff04a3c09f1d94.jpg)
Specifications
Specifications
Add Model
Specifications |
||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere630DDraper |
Cutterbar
Type | Straight line knife drive system | |||
---|---|---|---|---|
Length | 9.3 m 30.5 ft |
|||
Knife drive | Dual knife base, single optional (for combine use only) | |||
Knife speed | 490 cycles/min | |||
Cutterbar tilt | Base hydraulic, 9 degrees tilt maximum |
Pickup reel
Number of slats | 6 bat poly base, 6 bat steel optional | |||
---|---|---|---|---|
Fingers | Nylon base, steel optional | |||
Diameter | 1,067 mm 42 in. |
|||
Height control | Hydraulic | |||
Speed control | Hydraulic | |||
Reel lift | Cylinder stroke 330 mm 13 in. Total Range 391.5 mm 15.4 in. |
|||
Reel fore and aft | Cylinder stroke 359 mm 14.1 in. Total range 620 mm 24.4 in. |
|||
Reel resume | Base | |||
Reel reverse | Base | |||
Operating speeds | 6-54 rpm | |||
Operating speeds (54-in. reel) |
Slat reel
Number of slats | ||||
---|---|---|---|---|
Diameter | ||||
Height control | ||||
Speed control | ||||
Operating speeds |
Draper belts
Width | Side belts 1,016 mm 40 in. Center belts 1,397 mm 55 in. Center belt not included with SPW configuration |
|||
---|---|---|---|---|
Clean height | 25.4 mm 1 in. |
|||
Operating speed | Side belts: variable up to 223 m/min 735 fpm Center belts: 212 m/min 695 fpm Center belt not included with SPW configuration |
|||
Speed control | Hydraulic from cab | |||
Center belt reverse | Base; Center belt not included with SPW configuration |
Feed drum
Diameter | 406 mm 16 in. Feed drum not included with SPW configuration |
|||
---|---|---|---|---|
Feed drum fingers | Heavy duty round 16 mm (0.625 in) diameter with breakaway notch and retainer | |||
Number of fingers | 18 | |||
Auger finger platform | Dual chevron, retracting | |||
Finger reach | 195 mm 6 in. |
|||
Drum/auger reverse | Base | |||
Operating speed | 195 rpm | |||
Center clean out door | Base |
Header height sensing
Type | Electro-hydraulic base | |||
---|---|---|---|---|
Header height sensing on the ground | Base | |||
Header height sensing off the ground | Base |
Auxiliary top auger
Type | Optional hydraulic drive |
---|
Dimensions
Platform length | 10.0 m 32.9 ft |
|||
---|---|---|---|---|
Overall operating depth | 2.5 m 8.2 ft |
|||
Transport width, field position | 9.9 m 32.5 ft |
|||
Transport width on wheel, less dividers | 2.7 m 8.9 ft |
|||
Transport length, hitch extended | 12.3 m 40.4 ft |
Weight
Approximate weight (slat reel) | ||||
---|---|---|---|---|
Approximate weight (pickup reel) | Combine only 3,109 kg 6,855 lb SPW only 2,509 kg 5,532 lb |
|||
Approximate weight (with transport) | Combine only 3,286 kg 7,245 lb SPW only 2,686 kg 5,922 lb |
|||
Approximate weight (optional 54-in. reel) |
Additional information
Date collected |
---|