7R 350 Tractor
- Engine HP1: 385 Max | 350 hp Rated
- Fully integrated precision ag technology
- Infinitely Variable Transmission (IVT™)
- Three cab and visibility packages available to customize your tractor
- Industry-leading power transfer with Cat 4 HD drawbar for heavier implements
1Engine power PS (hp ISO) at max engine power speed (ECE-R120). John Deere Standard RES10080, SAE Standards J1995.
Specifications
Specs & Compare
Specs & Compare | ||||
---|---|---|---|---|
John Deere 7R 350 Tractor |
Key Specs
Engine description | John Deere PowerTech™ (B20 diesel compatible) 9.0L | |||
---|---|---|---|---|
Engine displacement | 9 L 549 cu in. |
|||
Rated engine power | ECE-R120: 257 kW 350 hp |
|||
Maximum engine power | ECE-R120: 283 kW 385 hp |
|||
Rated PTO power (hp SAE) | 193 kW 260 hp |
|||
Maximum PTO power | ||||
Transmission type | Standard: John Deer Infinitely Variable transmission (IVT™): 0.05-42 km/h 0.03-26 mph Optional: John Deere IVT: 0.05-50 km/h 0.03- 31 mph |
|||
Hydraulic pump rated output | Standard: 63 cc: 162 L/min 43 gpm Optional: 85 cc: 222.3 L/min 59 gpm |
|||
Rear hitch category (SAE designation) | Standard: Category 3N/3 with Quik-Coupler Optional: Category 3/3N with hook ends Category 3N/3 with hook ends |
|||
Base machine weight | VT, TLS, 480/80R50 tires: 11,000 kg 24,300 lb |
Engine specifications
Description | John Deere PowerTech™ (B20 diesel compatible) 9.0L | |||
---|---|---|---|---|
Engine type | Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head | |||
Engine family | MJDXL09.0319 | |||
Rated speed | 2100 rpm | |||
Aspiration | Single turbocharger, variable geometry turbo | |||
Cylinders liners | ||||
Emission level | Final Tier 4 | |||
After treatment type | Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF) | |||
Displacement | 9 L 549 cu in. |
Engine performance
Rated power | ECE-R120: 257 kW 350 hp |
|||
---|---|---|---|---|
Rated PTO power (hp SAE) | 193 kW 260 hp |
|||
Maximum PTO power | ||||
Intelligent Power Management (IPM) | ||||
Power boost | IPM: 18.6 kW 25 hp |
|||
Maximum engine power | ECE-R120: 283 kW 385 hp |
|||
Engine peak torque | At 1600 rpm: 1,580 Nm 1,165 lb-ft |
|||
Drawbar power | ||||
PTO torque rise | 40 percent | |||
Fuel injection system and control | ||||
Air cleaner type |
Transmission
Type | Standard: John Deere IVT: 0.05-42 km/h 0.03-26 mph Optional: John Deere IVT: 0.05-50 km/h 0.03- 31 mph |
|||
---|---|---|---|---|
Reverser | ||||
Clutch; wet/dry | ||||
Creeper |
Hydraulic system
Type | Closed-center, pressure-and-flow compensated system with load sensing | |||
---|---|---|---|---|
Pump rated output | Standard: 63 cc: 162 L/min 43 gpm Optional: 85 cc: 222.3 L/min 59 gpm |
|||
Available flow at a single rear SCV | 132 L/min 35 gpm |
|||
Available flow at front SCVs | 126 L/min 33 gpm |
|||
Number of rear selective control valves (SCVs) | Standard: Four SCVs Optional: Three to six ISO couplers: 12.7 mm 0.5 in. Five ISO couplers (SCV 1: 19 mm [0.75 in.] , SCV 2-5: 12.7 mm [0.5 in.]) |
|||
Number of mid selective control valves (SCVs) | ||||
Number of front selective control valves (SCVs) | One with front hitch | |||
Joystick SCV control | ||||
Auxiliary hydraulic features | ||||
SCV control | Electronic |
Rear hitch
Hitch draft control load sense type | ||||
---|---|---|---|---|
Remote control valves available | ||||
Hitch category (SAE designation) | Standard: Category 3N/3 with Quik-Coupler Optional: Category 3/3N with hook ends Category 3N/3 with hook ends |
|||
Maximum lift capacity behind lift points | Standard (Category 3): 6,894 kg 15,200 lb Optional (Category 3N): 7,847 kg 17,300 lb Standard (Category 3 with hook ends): 6,894 kg Optional (Category 3N with hook ends): 7,847 kg |
|||
Lift capacity at standard frame | ||||
Sensing type | Electrohydraulic | |||
Rear axle differential lock |
Drawbar
Drawbar category | Standard: Category 4 | |||
---|---|---|---|---|
Maximum vertical load | Standard: Category 4: 4,990 kg 11,000 lb |
Rear power take-off (PTO)
Type | Independent Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35-mm (1.375-in.) 540/1000 rpm 44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35-mm (1.375-in.) 540E/1000/1000E rpm gearcase 44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35-mm (1.375-in.) 540/540E/1000 rpm gearcase |
|||
---|---|---|---|---|
Engine rpm (at rated PTO speeds) | 540/1000 PTO rpm at 1950 engine rpm 540E/1000E PTO rpm at 1750 engine rpm |
|||
Economy PTO speeds | ||||
Reverse PTO speeds | ||||
Multispeed PTO option availability | ||||
Ground speed PTO option availability | ||||
PTO actuation | Electric switch with adjustable modulation |
Front hitch
Category | Category 3N, ground engaging | |||
---|---|---|---|---|
Electric power | Seven-pin connector | |||
Standard lift capacity | 5,200 kg 11,464 lb |
|||
Front power take-off (PTO) | Available: 35 mm (1.375 in.) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO) Available through Parts: 44.45 mm (1.75 in.), 20 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO) |
|||
PTO speed | 1,000 PTO rpm at 1940 engine rpm |
Rear axle
Type | Standard: Rack-and-pinion or flange axles Optional: Diameter: 120 x 2550 mm 4.72 x 100.4 in. Diameter: 120 x 3010 mm 4.72 x 118.5 in. Flanged axle: 335 mm mm 13.2 in. |
|||
---|---|---|---|---|
Final drive type | Inboard planetary three pinion | |||
Differential controls | ||||
Axle type | ||||
Brakes, type and control | ||||
Rear differential lock | Full-locking electrohydraulic | |||
Load rating |
Front axle
Type | Standard: TLS with front brakes | |||
---|---|---|---|---|
Front axle differential lock | Full-locking electrohydraulic (actuated at same time as rear diff lock) | |||
Load rating |
Tires
Rear | RCI Group 48/49 | |||
---|---|---|---|---|
Wheel tread range | ||||
Turning radius with brakes | 600/70R30 group 43 tires at 188.2-cm (74.1-in.) spacing, TLS: 6.7 m 22 ft 620/75R30 group 44 tires at 208.3-cm (82-in.) spacing, TLS: 8.7 m 28.5 ft |
|||
Turning radius without brakes | ||||
Central Tire Inflation System (CTIS) | ||||
Front |
Tracks
Tread spacing | ||||
---|---|---|---|---|
Drive type | ||||
Track width | ||||
Midrollers |
Steering
Type | Standard: Hydraulic power-steering with electric pump back-up Optional: ActiveCommand Steering 2 (ACS2) w/ electronic back-up pump |
---|
Brakes
Primary brake (foot brake) | ||||
---|---|---|---|---|
Secondary brake | ||||
Park lock | ||||
MFWD braking | ||||
Front axle brakes | ||||
Auxiliary brakes | ||||
Hydraulic trailer brakes | ||||
Pneumatic trailer brakes |
Electrical system
Alternator size | Standard: 210 amp Optional: 250 amp |
|||
---|---|---|---|---|
Battery options | 12 V | |||
Working lights | Standard: 18 halogen Available: 18 LED 22 LED |
|||
Type of bulb in headlight (Halogen, Zenon, LED) | Standard: 65-W halogen Available: LED |
|||
Type of bulb in beacon (Halogen, Zenon, LED) | ||||
dB(A) rating for backup alarm | ||||
Total cold cranking amps | With two 925-CCA group 31 batteries: 1850 CCA |
Operator station
Rollover protective structure, OOS | ||||
---|---|---|---|---|
Seat | Degree of seat swivel, left hand Optional: 25 degree Degree of seat swivel, right hand 40 degree Standard: air suspension Optional: ActiveSeat™ II |
|||
Cab suspension | Optional | |||
Instructional seat | Standard | |||
Display | Standard: 4600 Generation 4 CommandCenter™ with 25.4-cm (10 in.) display | |||
Radio | Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna | |||
Inner cab volume | 3.24 m3 114 cu ft |
|||
dB(A) rating | ||||
Cab glass area | 6.56 m2 70.61 sq ft |
|||
Safety glass rating | ||||
Front visibility |
Dimensions
Wheelbase | 2,925 mm 115.2 in. |
|||
---|---|---|---|---|
Overall width | ||||
Overall length | 5,540 mm 218 in. |
|||
Overall height | ||||
Drawbar clearance | Group 48 rear tires: 415 mm 16.3 in. Group 49 rear tires: 461 mm 18.1 in. |
|||
Front axle center | ||||
Approximate shipping weight, Open;Cab |
Weight
Base machine weight | IVT, TLS, 480/80R50 tires: 11,000 kg 24,300 lb |
|||
---|---|---|---|---|
Maximum ballast level | SAE PTO hp: 61.2 kg 135 lb |
|||
Maximum permissible weight |
Capacities
Crankcase oil volume | 23 L 6.1 gal. |
|||
---|---|---|---|---|
Fuel tank | IVT: 513 L 135 U.S. gal. |
|||
Diesel exhaust fluid (DEF) tank | 26.2 L 6.9 U.S. gal. |
|||
Cooling system | 44.5 L 11.8 U.S. gal. |
|||
Transmission-hydraulic system | 160 L 42.3 U.S. gal. |
Serviceability
Interval for engine oil change | 500 hours | |||
---|---|---|---|---|
Interval for hydraulic/transmission oil change | 1,500 hours | |||
Interval for engine coolant change | 6,000 hours |
Loaders
Loader | 700M | |||
---|---|---|---|---|
Lift capacity at full height | 2,417 kg 5,304 lb |
|||
Maximum lift height | 4,741 mm 186 in. |
|||
Leveling type |
Precision AG
Guidance | Integrated AutoTrac™ | |||
---|---|---|---|---|
Telematic | JDLink™ | |||
Remote diagnostics | ServiceADVISOR™ remote: available with JDLink hardware and activations Remote Display Access: available with JDLink hardware and activations |
Miscellaneous
AutoTrac ready | ||||
---|---|---|---|---|
ISOBUS ready | ||||
CommandCenter video inputs | ||||
Immobilizer | ||||
Side slope rating | ||||
Uphill/downhill slope rating | ||||
Country of manufacture | USA |
Additional information
Date collected | 10-July-2020 |
---|