830 Mower-Conditioner
- Optional V10 rolls and Wide Swath Kit
- Modular-design cutterbar
- Adjustable roll pressure
- Hydraulic tongue positioning
![Studio image of 830 Mower Conditioner](https://www.deere.com/assets/images/region-4/products/hay-and-forage/hay-and-forage-mowing-equipment/mower-conditioners/830/830_moco_454818_small_9c1afc6193424edadbfa6912a62376a81b825dae.jpg)
Specifications
Specs & Compare
Add Model
Specs & Compare |
||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere 830 Mower-Conditioner |
Key Specs
PTO speed | 540 or 1,000 rpm | |||
---|---|---|---|---|
1000 rpm 1-3/8 in. PTO | 52-112 kW 70-150 hp |
|||
1000 rpm 1-3/4 in. PTO | ||||
Powerline type | Double-telescoping Grob spline (swivel is tube) | |||
Standard hitch | Ball joint equal angle hitch | |||
Optional hitch | Rockshaft swivel hitch | |||
Hydraulic pressure required | 13,790 kPa 2,000 psi |
|||
Cutterbar - cutting width | 3 m 9.8 ft |
|||
Number of disks/knifes | 6 12 |
|||
Transport width | 3 m 9.8 ft |
Power requirements
PTO speed | 540 or 1,000 rpm | |||
---|---|---|---|---|
540 rpm PTO | ||||
1000 rpm 1-3/8 in. PTO | 52-112 kW 70-150 hp |
|||
1000 rpm 1-3/4 in. PTO | ||||
Powerline type | Double-telescoping Grob spline (swivel is tube) |
Tractor equipment
Tractor connection | ||||
---|---|---|---|---|
Standard hitch | Ball joint equal angle hitch | |||
Optional hitch | Rockshaft swivel hitch | |||
Hydraulic pressure required | 13,790 kPa 2,000 psi |
|||
Hydraulic connections |
Cutterbar
Type | John Deere | |||
---|---|---|---|---|
Cutting width | 3 m 9.8 ft |
|||
Cutting height | 2-9.5 cm 0.8-3.7 in. |
|||
Number of disks | 6 | |||
Number of knives | 12 | |||
Bolted knives | ||||
Disk speed | 2,650 rpm | |||
Knife tip speed | 307 km/h 191 mph |
|||
Disk drive | Gear | |||
Lubrication | Hy-Gard oil | |||
Oil reservoir capacity | 7 L 7.4 U.S. qt |
|||
Cutterbar oil check | Combination check, drain plug | |||
Cutterbar angle | Adjustable | |||
Angle adjustment | Mechanical standard | |||
Angle range | ||||
Cutterbar protection | Shearhub | |||
Adjustable gauge shoes | Yes | |||
Suspension system |
Impeller conditioner
Width | 185 cm 73 in. |
|||
---|---|---|---|---|
Diameter | 60 cm 23.5 in. |
|||
Tines type | V-tines | |||
Number of tines | 45 | |||
Number of speeds | Two | |||
Drive | 3-V powerband belt and sheaves | |||
Conditioner hood | Adjustable, single hand crank | |||
Wide spread |
Rolls conditioner
Width | 185 cm 73 in. |
|||
---|---|---|---|---|
Diameter | 25.4 cm 10 in. |
|||
Type of material | Urethane | |||
Design | Recessed cleat | |||
Speed | 664 rpm | |||
Drive | Telescoping shaft | |||
Windrow width |
Dimensions
Transport width | 3 m 9.8 ft |
|||
---|---|---|---|---|
Overall length | ||||
Transport length | 6.3 m 20.6 ft |
|||
Weight, roll conditioner | With urethane roll conditioner: Equal angle: 2,519 kg 5,553 lb |
|||
Weight, impeller conditioner | Equal angle: 2,376 kg 5,238 lb |
|||
Standard tires | Standard: 11L-15 Optional: 31x13.5L 15 |
General
Are wrenches required for adjusting? | Header tilt Yes |
---|
Additional information
Date collected |
---|