H120 Loader
- Compatible with the 1023E and 1025R
- Quik-Park stands for easy attachment and removal
- 512 pounds (232 kg) of lift capacity
- 71.2 in. (1,809 mm) of lift height
Features
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pin
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
Easily remove and mount loader to and from the tractor without tools
Quik-Park™ loader mounting system
The Quik-Park mounting system on the H120 Loader is designed for easy removal and mounting to and from the tractor without tools.
Similar to that of the H130 and former 200CX Loaders, the H120’s parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.
To view a video of how the Quik-Park™ system works click here.
NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.
Easy removal and mounting (shown on a noncurrent 1026R)
Mount to and from the tractor without tools
Specifications
Specifications
Add Model
Specifications |
||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere H120 Loader |
Key Specs
| Maximum lift height (A) | 1809 mm 71.2 in. |
|||
|---|---|---|---|---|
| Lift capacity at full height | Measured at pivot (U) 319 kg 703 lb Measured at 500 mm ahead of pivot (V) 232 kg 512 lb |
|||
| Boom breakout force | Measured at pivot (Y) 782 kg 1725 lb Measured at 500 mm ahead of pivot (Z) 595 kg 1311 lb |
|||
| Bucket rollback force capacity | At ground-level line (ZZ) 867 kg 1911 lb |
|||
| Clearance at full height - bucket dumped (C) | 1371 mm 54 in. |
|||
| Dump angle, degrees (E) | -40.1 degree (angle) | |||
| Rollback angle, degrees (G) | 31.2 degree (angle) |
Tractor
| Model | 1025R/1023E/1026R Tractor | |||
|---|---|---|---|---|
| Front tire | 18x8.5-10 4PR R4 | |||
| Rear tire | 26x12.00-12 4PR R4 | |||
| Front axle configuration | ||||
| Wheelbase | 1450 mm 57 in. |
|||
| Pump capacity | 3.5 gpm | |||
| Rated pressure | 1987 psi |
Loader
| Base weight | 246.1 kg | |||
|---|---|---|---|---|
| Leveling configuration | ||||
| Bucket used | Pin On Materials 1250 mm 49 in. |
|||
| Bucket weight | 70 kg 155 lb |
|||
| Lift capacity at full height | Measured at pivot (U) 319 kg 703 lb Measured at 500 mm ahead of pivot (V) 232 kg 512 lb |
|||
| Lift capacity at 59 in. (1500 mm) | Measured at pivot (W) 331 kg 729 lb Measured at 500 mm ahead of pivot (X) 262 kg 578 lb |
|||
| Boom breakout force | Measured at pivot (Y) 782 kg 1725 lb Measured at 500 mm ahead of pivot (Z) 595 kg 1311 lb |
|||
| Bucket rollback force capacity | At maximum height (VV) 763 kg 1682 lb At 59-in. (1500-mm) lift height (XX) 789 kg 1739 lb At ground-level line (ZZ) 867 kg 1911 lb |
|||
| Dimensions | Maximum lift height (A) 1809 mm 71.2 in. At full height - bucket level(B) 1653 mm 65.1 in. At full height - bucket dumped (C) 1371 mm 54 in. |
|||
| Overall length (I+F), ft (m) | 2.6 m 8.6 ft |
|||
| Overall height in carry position (J) | ||||
| Digging depth (H) | -101 mm -4 in. |
|||
| Reach | At maximum height (D) 571 mm 22.5 in. At ground level - bucket level (F) 1176 mm 46.3 in. |
|||
| Bucket angle | Dump angle, degrees (E) -40.1 degree (angle) Rollback angle, degrees (G) 31.2 degree (angle) Dump angle, ground -114 degree (angle) |
|||
| Cycle times | Loader raise, seconds 4 seconds Loader lower, seconds 2.5 seconds Bucket dump, seconds 5.7 (without regen)/2.2 (with regen) seconds Bucket rollback, seconds 3.5 seconds |
Additional information
| Date collected |
|---|